There is a wide variety of leather types and qualities being used in footwear manufacturing today but the best without doubt is Full Grain Cow leather in excess of 2mm thick - just like what use on our V12’s

Cow leather has the best combination of strength, breathability and water resistance. No stiff, cheap buffalo leathers round here!

So whats so good about expensive leather?

  a.. Good breathability  is essential for healthy feet. One customer who used to suffer from Atheletes foot recently reported that since choosing one of our styles the problem has disappeared - result!

  b.. Good leathers last longer.We buy the best quality hides, selected for their tear strength, pH balance and breathabilty. The hides are impregnated with natural oils during the tanning process to give a supple water resistant finish which can be revived time after time with a suitable leather food 

 c.. Of course, they look great too!
So when you sell a pair of V12s you can be confident that your customer is getting  the best there is, and that they will come back for more.

1) Keep your feet dry! First, be sure to wear socks (X01 & X02) that wick moisture away from your feet, Second, thoroughly dry the inside of your boots by wadding up newspaper and placing it inside the boot to absorb moisture.2) Consider activity levels when deciding the proper insulation/comfort rating

If you’re driving a forklift or reach truck, a higher level of insulation will be required to keep the feet warm and safe. Also, if you have circulation problems, consider a higher level of insulation.

3) Thermoplastic and steel toes are capable of resisting a heavy falling objective. Safety toes protect you from injury and down time.

4) Wet conditions require a boot that has more surface contact. Consider your environment and slip resistance ratings to choose the best boots.

5) Cold store boots should not fit too tightly. To provide proper insulation, some air space is needed between the foot and the lining of the boots. When sizing boots, try them on at the end of each day when your foot is a little larger from swelling.

6) Choose the height of the upper base on the amount of leg support needed.

7) To make laces last longer, pull them sideways to tighten, do not pull straight.

8   Never put leather boots near direct heat. It destroys the leather, melts the sole materials and causes bonding agents to lose their grip.

The Fortec safety footwear V12 range, supplied by Delf Coldwear Solutions is built for strength. The vintage leather is full gain cowhide which has been produced using special methods which allow the natural finish to show through, each hide is unique with its fence marks and burrs giving an aged effect.

The leather has been tested and selected for its tear strength, water vapour permeability and suitable pH level to ensure total comfort and long wear. The craftsmanship involved in making the V12 footwear uses traditional shoe making skills, which take time to learn. Every pair is built to last.

All the V12 are Goodyear Welted. Charles Goodyear produced the very toughest work boots. The upper is attached to the sole by lock stitching through the welt to ensure they stay together for good. Below are just 3 samples of the V12 range.

Please go to our main footwear web page for the full range of safety footwear.